Cyclofiltre 4X and 4Y bag filter dust collector 1

Technical characteristics

Extraction type
Manufacturer reference

Description

Series 4 Cyclofiltres combine cyclonic pre-separation and bag filtration in a single body, with no upstream cyclone required. Designed for industries producing large volumes of dust, they handle 4,500 to 160,000 m³/h and accept concentrations above 300 g/m³. A patented perforated cartridge surrounds the bags: it slows the upward air velocity and protects the media from abrasion, giving a low, stable pressure drop and emissions well below 0.1 mg/m³ (stated efficiency 99.99974%). The antistatic polyester bags are cleaned by compressed air (6 bar maximum) under control of the PSI18T pressure switch. Type 4Y operates under pressure or vacuum; type 4X runs under pressure, vacuum operation being reserved for the 4Y. The unit is ATEX II 2D certified (INERIS 03 ATEX 3035 X/01), protected by vents for ST1 dusts sized to NF EN 14491, and limited to 75 °C and 2,000 Pa. Air recirculation into the workshop is possible subject to regulations.

A question about installation, quantities or lead times?

Technical sheet · 1 document(s)

Projects by CATTINAIR

All projects ›

Several packages on your site?

Describe your project once: each relevant supplier responds for its own package.

✓ Free · ✓ Identity hidden · ✓ Checked within 2 h

Post a project

Do you make extraction & air treatment? Receive requests from buyers looking for your products near them, and show your catalogue here.

Receive requests