GC high-flow cyclone separator 25,000 to 72,000 m³/h 1

Technical characteristics

Description

The GC cyclone is CATTINAIR's centrifugal separator for high-flow extraction systems: six sizes cover 25,000 to 72,000 m³/h, with diameters from 2.4 to 4 m. Air laden with chips or dust is set spinning; thrown against the wall, the particles drop into the cone while the cleaned air rises to the outlet. Efficiency depends on rotation speed, particle density and particle size: it reaches 99.9% on green sawdust but is markedly lower on dust around 5 microns. Actual flow may deviate by ±20% from the average capacity, with a pressure drop of 1,100 Pa. Built from 2 mm steel sheet (3 mm optional), it features an adjustable outlet elbow with rain cap and control damper, plus an inspection hatch on the cone. Maximum operating temperature is 75 °C. Options include an anti-blockage probe, an air take-up element with explosion vent for ST1 dusts and a special colour (standard beige RAL 1013).

A question about installation, quantities or lead times?

Technical sheet · 1 document(s)

Projects by CATTINAIR

All projects ›

Several packages on your site?

Describe your project once: each relevant supplier responds for its own package.

✓ Free · ✓ Identity hidden · ✓ Checked within 2 h

Post a project

Do you make extraction & air treatment? Receive requests from buyers looking for your products near them, and show your catalogue here.

Receive requests