Larenn 250 BLX Optima automatic vertical panel saw 1

Technical characteristics

Saw type
Condition
Location
Max cutting height
Power
Blade diameter

Description

The 250 BLX Optima brings together automatic traverse of the saw unit and the Optima frame, designed as a dust collector thanks to its tubular structure and the ducts between the battens. Pneumatic valves, triggered by presence detectors, open the collection only where the blade is working; a single 160 mm outlet leaves on the right-hand side of the machine. Larenn states that this arrangement brings exposure below 0.35 mg/m³ of dust over an 8 hour period, provided the saw is connected to a central extraction system or to a separate unit of at least 2 000 m³/h, interlocked with the machine and with a run-on delay at the end of the operation. A pressure switch shuts the installation down if the pressure drops too low and the saw stops on any fault in the extraction system. The 4 kW motor with electromagnetic brake drives a 250 mm carbide blade at 5 400 rpm for a 60 mm cut, with three feed speeds from 10 to 20 m/min. Four cutting sizes run from 3 100 × 1 900 mm to 7 100 × 2 200 mm.

A question about installation, quantities or lead times?

Technical sheet · 1 document(s)

Projects by Larenn

All projects ›

Several packages on your site?

Describe your project once: each relevant supplier responds for its own package.

✓ Free · ✓ Identity hidden · ✓ Checked within 2 h

Post a project

Do you make stationary saws? Receive requests from buyers looking for your products near them, and show your catalogue here.

Receive requests