Saw blades for resaw gang saws with, version 2

Description

Saw blades for resaw gang saws with, version 2 are aimed at resaw machines with or without a hogger. The tool is used for ripping in wet and dry timber. In terms of design, LEUCO provides: tooth form: flat “F” and cutting material: HW HL Board 20. Advantages highlighted by LEUCO: very high bending strength and tooth hardness, and no build-up on the blade body thanks to the carbide stabilisers. The range comes in 12 versions: outside diameter from 520 to 570 mm, bore of 150 mm, cutting width from 2.8 to 4.8 mm and number of teeth from 20 to 57. Cutting material: alloy steel (HL) and carbide (HW). To consider before ordering: the saw blade is optimised to the customer’s requirements and the machine parameters after consultation with AWT and to LEUCO standards, and the identification number is given for guidance only.